Furniture Stain Removal Solutions
This is your step by step guide to furniture stain removal. Your wooden furniture needs regular maintenance. Consider that dining room table you bought a few years ago. Wouldn’t it be nice if, years down the road, your grandchildren prized it as an antique? Here’s what you need to know to remove common stains from wooden furniture.
1. For furniture stain removal, apply a small amount of rubbing alcohol to the stain.
2. Remove after 5 minutes by wiping.
3. Repeat if needed.
4. If rubbing alcohol does not remove the spot, then try white (non-gel) shaving cream foam.
5. Condition with a high-quality furniture wax.
Beer and Alcohol
1. Stains of this nature will darken and possibly warp the wood.
2. Clean with a solution of ¼ cup white vinegar per quart of water.
3. Dry, then wait several days to see if the wood will be darkened.
4. It may be necessary to sand and refinish the furniture.
5. If the wood has not darkened, apply a high-quality wood conditioner.
1. For furniture stain removal, use 3% hydrogen peroxide, but go easy because it can bleach the wood.
2. Apply, wait 5 to 10 minutes, and blot with ¼ cup white vinegar per quart of water.
3. If the wood bleaches, use the meat of a walnut or pecan to restore the color.
4. Treat with wood conditioner.
1. Use ice directly on the wax to get it as cold as possible and immediately wipe up excess water.
2. Once the wax is very cold, try carefully inserting a butter knife under the wax to see whether it will pop off.
3. If this method doesn’t work, don’t attempt anything else. Consult a professional.
Coffee or Cola
1. Wipe immediately.
2. If water spots remain from larger stains, use a good wood cleaner and conditioner made to remove water spots from furniture.
Glue and Adhesive
1. For furniture stain removal, freeze the glue with an ice cube placed in a zip-lock bag.
2. Scrape off what you can with a plastic scraper.
3. Apply a small amount of smooth peanut butter, wait 5 minutes, and gently blot. The oil from peanut butter should dissolve any remaining glue.
Grease (Auto) and Motor Oil
1. Rubbing alcohol will remove grease and oil from sealed furniture.
2. Apply, wait no longer than 5 minutes, and remove with a soft cloth.
3. Repeat if needed.
4. For tung oil finishes, pour on enough cornstarch to thoroughly cover the stain, gently pressing it into the wood.
5. Wait 30 to 60 minutes and vacuum off the cornstarch.
6. Keep applying until no more oil is absorbed.
7. Then dab on just a bit of rubbing alcohol with a cotton swab and follow step 2.
8. Apply furniture wax to all furniture surfaces to restore the wood’s luster.
1. Apply real mayonnaise to soften the remaining gum.
2. Use a solution of ¼ cup white vinegar per quart of water for furniture stain removal.
3. Follow with a high-quality wax for wood furniture.
1. If the spilled polish is still wet, blot clean and wipe any remaining residue with mineral spirits. Avoid nail polish remover – it contains solvents that can dissolve the furniture finish.
2. If the stain is dry, soak the stain for no longer than 5 minutes with boiled linseed oil, and then scrape off the reside with a nonstick spatula.
3. Repeat the process as needed.
4. Treat the wood after it dries with a wood conditioner to prevent drying and cracking of the wood.
1. If you have a fresh paint stain on your furniture, remove latex paint with water; remove alkyd (oil-based) paint with mineral spirits.
2. To remove a dry stain, saturate the spot in boiled linseed oil.
3. After the pain softens, lift it off carefully with a putty knife. Alternatively, wipe with a cloth dampened in the boiled linseed oil.
4. Remove residue by making a paste of boiled linseed oil and rottenstone, a polishing powder sold where you buy refinishing supplies.5. Rub the paste along the grain, and then wipe it dry ad wax or polish it.
1. For furniture stain removal, squeeze enough juice from a fresh lemon to thoroughly saturate the spot. Do not allow it to set for long or it will warp the wood. Blot.
2. If that begins to dissolve the rust, wait 24 to 48 hours for the wood to dry and repeat.
3. If the rust is stubborn, boil linseed oil, lightly apply to the wood, wait 5 to 10 minutes, and blot.
4. The wood may need to be sanded with a 0000 steel-wool pad.
5. Apply a wood conditioner or refinish if needed.
Note: It may be impossible to completely remove the polish because it works into the grain of the wood.
1. Try blotting the polish with rubbing alcohol.
2. Wait 15 minutes and blot to remove.
3. Alcohol removes some shoe polishes but not all of them.
4. If that does not bring the desired results, apply a bit of turpentine.
5. If the polish remains, it has soaked into the grain and the wood must be sanded and refinished.
1. Blot immediately until no more moisture has soaked into the towel.
2. For furniture stain removal, press cornstarch on the stain to absorb as much wine as possible.
3. Remove and repeat until the moisture is gone.
4. Wait until the wood has dried, and then apply peroxide. It may be possible to apply a wood stain or use the meat of a walnut or pecan to restore the color.
5. Sanding and refinishing the surface may be necessary.
I hope you achieve furniture stain removal success!
Rug Stain Removal
Leather Stain Removal
Marble Stain Removal
Return from Furniture Stain Removal Solutions to Stain Removal A-Z
Return to Home Page